orlixaq
COROLLATA Dual Laser Measuring Tool 393Ft — Measure Both Directions at Once, Rechargeable Distance Meter with Angle Sensor & Level Bubble
COROLLATA Dual Laser Measuring Tool 393Ft — Measure Both Directions at Once, Rechargeable Distance Meter with Angle Sensor & Level Bubble
SKU:ADNl72Ht1B
260 in stock
Couldn't load pickup availability
COROLLATA dual laser distance meter fires two beams from both ends. One press = 3 results (left + right + total). No helper, no wall contact. 10 modes: bilateral, area, volume, Pythagorean height. Range 0.5–394ft bilateral. ±1/16in accuracy. USB-C rechargeable. Alone on a 40,000 sq ft floor. One shot from center gives total width, left clearance, and right clearance — before you put your arm down. Eight showings in a day. Point, shoot, show the buyer the number. No tape measure, no helper, no guessing room sizes. Tiling alone. Planning furniture alone. Area and volume calculated on-device — so your solo project stays accurate and on budget. Your current laser reads decimals. Your blueprints are written in fractions. COROLLATA adds ft-in fraction display to 1/32'. What ±1.5mm Means on the Job. ±1.5mm one-way · ±3mm bilateral. At 30 feet, within 1/8″. At 100 feet, within 3/16″. Covers walls, flooring, cabinetry, and trim. Switch to ft-in fraction mode: screen reads 8'10 21/32″ — the exact format used in construction drawings and material orders. For renovation work, this tool will not be your source of error. Can I get readings in fractional inches like 12 ft 3 7/16 in? Yes. Hold UNIT 2 seconds to cycle: m -> ft -> in -> ft-in fractions. Displays exactly as written in construction drawings. No conversion needed. How do I turn off the beeping? Hold FUNC/RECORD and MEAS simultaneously for 5 full seconds. A crossed-out speaker icon confirms silent mode is active. Repeat the same action to re-enable sound. Works in any mode, any time. How do I switch between measuring both directions vs. just one direction? Press FUNC from the main screen. Double arrow icon means bilateral mode — both ends fire simultaneously. Single arrow means single-end mode. Press FUNC again to toggle. Is this accurate enough for tile work, flooring, or trim carpentry? Yes. At 30ft, readings are within 3/16 in of actual. Use ft-in fraction mode for finish carpentry. Not intended for surveying-grade applications. Does it work in dark rooms, attics, or basements? Yes. LCD has auto backlight for low-light conditions. Red laser visible across full range indoors. For outdoor use in bright sunlight, distances over 10ft give the most reliable readings. Model TZCB120 Range 0.5–197ft one-way · 0.5–394ft bilateral Accuracy ±1.5mm one-way · ±3mm bilateral Units m / ft / in / ft-in fractions Modes 10 measurement + tilt + level Tilt | ±90° Display Backlit LCD · 3-line · auto-rotate · 100 memory slots Body CNC aluminum · matte dark charcoal Protection IP54 · 1.5m / 5ft drop-rated Magnetic 4-magnet back · hands-free on steel Battery 700mAh · 3.7V lithium · USB-C · ~3hr charge Battery Life ≥8,000 one-way · ≥5,000 bilateral Op. Temp 32°F to 104°F (0°C to 40°C) Storage Temp -4°F to 140°F (-20°C to 60°C) Size & Weight 115×50×23mm · 155g / 5.5oz. COROLLATA Dual Laser Distance Measuring Tool — Measure Both Directions at Once. THIS TOOL WAS BUILT FOR YOU. CONTRACTORS & BUILDERS. REAL ESTATE AGENTS. DIY RENOVATORS. TOOL UPGRADERS. ±1.5mm Accuracy. Better Than Most. Built for the Job. Switch Units — Including Ft-In Fractions. Turn Off the Beeping in 5 Seconds. Press MEAS — That's It. Cycle Through 10 Measurement Modes. Scroll Back Through Your Measurements. COROLLATA Dual Laser Distance Meter — Complete Technical Specifications.
